-40%

Auto Air Colors 2oz candy2o Complete Set 4681-00

$ 81.83

Availability: 20 in stock
  • Country/Region of Manufacture: United States
  • MPN: 4681-00
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Brand: Auto Air Colors
  • Condition: New
  • Restocking Fee: No

    Description

    Candy 2o Master Set
    Item # 4681-00
    Contains 2oz. each:
    Blood Red, Sunset Magenta, Tequila Yellow, Lemon Yellow, Grabber Orange, Marine Blue, Midnight Blue, Caribe Blue, Ultra Violet, Deep Purple, Poison Green, Emerald Green, Dirt Track Brown, Red Oxide, Black, 4004 Transparent Base, 4011 Reducer, 4030 Mix Additive
    4600 Series candy2o –
    TRUE CANDY PERFORMANCE Brilliant transparent colors for custom refinishing and airbrushing.
    candy2o combine advanced water-soluble, urethane resin technology with crystal-clear dyes to create truly exceptional candy colors.
    candy2o are concentrate.
    Add 10% per volume (9:1 mix ratio) 4030 Intercoat for spray performance.
    Optional lowering of viscosity is achieved by reducing with either 4012 High Performance or 4020 Automotive Reducer.
    candy2o are intense. 4 – 6 medium wet coats are recommended for full color saturation.
    Allow each coat to air dry tack free prior; approximately 10 minutes flash time in between coats when painting in non-humid, temperate conditions.
    candy2o are made for the graphic arts with excellent adhesion so they will not lift or peel when taped on.
    Apply 4030 Intercoat direct over air-dried Candy 2O to prevent bleeding when applying other colors and marking when taping.
    candy2o work with a wide variety of spray-gun and airbrushes.
    The following specs are recommended as a starting point.
    As always, achieving a finely atomized spray pattern is the goal.
    Reduce and adjust settings & psi to achieve a spray pattern that is smooth and free of large, color droplets or a “grainy” over-spray look.
    spray-gun: 1.2 – 1.3mm tip, 25 – 35 psi
    mini-gun: 0.8 – 1.0mm, 25 – 35 psi
    airbrush: 0.5mm – mixing with 4030 generally enough, smaller tip-sizes reduce with 4011 or 4020 Automotive Reducer as needed to achieve optimum atomization